Switching From The Start Screen Into The Language Menu; Setting The Language; Set The Country - Bosch BPT-S 4.6 Betriebsanleitung

88 | Commissioning
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
If the display screen is dirty or old, the distance for
the gesture control may be less.
6.4.1 Switching from the start screen into the
language menu
Prerequisites
Find out the required standard that must be set

from your local energy supply company.
 Service switch on the string inverter is set to 1
Start screen is displayed

e.Key or hand operated
▶
Procedure
1. To switch to the language menu: Carry out a long
gesture
■
The language menu is displayed.
6.4.2

Setting the language

▶
Procedure
1. Carry out short gestures until the desired language
appears (e.g. English) and the angled brackets
flash:
Language
<English>
2. To confirm: Carry out a long gesture
■
Entry is confirmed: Flashing stops and the next menu
is displayed.
6.4.3

Set the country

▶
Procedure
1. Carry out short gestures until the desired country
appears (e.g. United Kingdom) and the angled
brackets flash:
English
Bosch Power Tec GmbH