Requirements For The Installation Location - Bosch BPT-S 4.6 Betriebsanleitung

42 | Transportation and installation
NOTICE
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
4.4 Requirements for the installation
location
Material damage due to an unsuitable installation
location (requirements)
If the following requirements for the installation
location are not observed, the device may be
damaged.
You must observe the listed requirements for the

installation location
Bosch BPT-S series devices can be mounted both
indoors and outdoors due to their protection type
(Specifications, p. 111).
Outdoor installation
When installing outdoors, observe the following:
Do not expose the device to intensive, direct

sunlight (derating, additional heating, light
reflection on the display, poor visibility on the
display)
Do not expose the device to heavy contamination

– Cooling fins must not be impaired in their function
– Avoid deposits on cooling fins
Do not expose the device to wet weather

Do not expose the device to heavy winds

Do not expose the device to high levels of dust or

sand (do not fit in desert climates)
Do not expose the device to biological activity

(moss, fungi, mildew)
Corrosive environments such as spray salt and

maritime climates lead to increased corrosion on
the device
English
Bosch Power Tec GmbH