Bosch BPT-S 4.6 Betriebsanleitung Seite 166

48 | Transportation and installation
207
NOTICE
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
190
207
M*
(1)
4.3:
[1]
2. Using a wall bracket as a drill template: Mark the
position of the drill holes (first: top left/centre/
right, then: bottom). Note the following here: Mark
the drill holes in such a way that the device display
will be at eye level.
3. Drill 4 drill holes (if mounting on a pole, only drill
the two vertical drill holes.)
4. Screw the wall bracket on tight
5. Pick up the device using the grip and lift into place
Material damage due to setting down the device
If the device is set down on its front or outer edges,
the housing can be scratched or damaged.
Only set the device down on the rear side

101
144.5
245.5
Wall bracket as a drill template (specifications in
mm), left: BPT-S 3/3.68, right: BPT-S 4/4.6
M*: Middle axis of the device
195 234
50.5
19.5
284.5
M*
(1)
Bosch Power Tec GmbH
English