Klarstein 10032527 Bedienungsanleitung Seite 22

EN
22
Disabling the timer on a certain day of the week
If you do not want to set the on-off timer on a certain day of the week, you need to press
the timer key continuously for four times to skip this day.
Example: you do not need to set on-off status on Tuesday. When the Monday timer
setting is finished, press the timer setting key, then you could set Tuesday. [ON] and
[MON] will disappear. Instead, [ON] and [TUE] will lit up. At the same time, the first
two digits begin to flash on the screen. In this case you should not press [+] or [-] button
to set time. Press the TIMER button again. At the same time, the second two digits begin
to flash on the screen. In this case you should not press [+] or [-] button to set time. Press
the TIMER button again. The [ON] icon on the display board will disappear while [OFF]
icon lit up and the digit tube will transfer to Wednesday set.
Note: The same day timing and weekly timing conflict, according to the principle of
first switch to the first set, all settings need memory function
Child lock
The child safety lock is adjustable from remote control only. Holding the child safety lock
button for 5 seconds disables or enables all functions on the control panel and remote
control.
Temperature control energy-saving features
• When the difference between acutal detected temperature and set temperature
are within 3°C (for example, set 18°C and detected 16°C -18°C), heating power
is1000 W.
• When the difference between acutal detected temperature and set temperature
exceeds 3°C (for example, set 18°C, detected as 15°C or below), heating power
is 2000 W.
• When the actual detected temperature is 1°C higher than the set temperature, the
heating will be off (for example, set to 27°C, the actual test is 28°C), the fan will
stop working after 10 seconds.
• Press the power off button on the control panel, the temperature control function will
record the last setting when power on again.