Safety Instructions; Operating Elements - Sachtler Video 75 Plus EFP Benutzerinformation

Manual
1

Safety instructions

->
When the camera is mounted, the clamping screw of the
Video 75 Plus EFP must only be released if camera and tri-
pod are secured against falling over.
->
When placing the camera plate into the Video 75 Plus EFP,
make sure not to put fingers within the range of the locking
lever, since it will snap back.
->
When releasing the vertical brake make sure that the came-
ra is secured against any sudden movement.
->
Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
->
Before transport reset fluid drag to "0".
2

Operating elements

Vertical setting of fluid drag
Touch
bubble
level
Battery holder of
Touch bubble level
Horizontal setting of fluid drag
Locking lever of Touch & Go system
Quickfix button for sliding-balance plate
Spindle for sliding-balance plate
Lock for sliding-balance plate
Level for ½ counterbalance spring
Tilt safety locker
Counterbalance knob
Vertical brake
Boost Button
- 1 -
Video 75 Plus EFP
Safety lock
of Touch &
Go system
Rosette zur
Schwenk -
armbefestigung
Horizontal
brake
Anschluß für
Sucherlupen
Stützsystem