Velleman CAMIP7 Bedienungsanleitung Seite 9

• Set the preferred colour for the On Screen Display (OSD): disabled (no OSD), black, yellow, red,
white or blue. The OSD shows the name of the camera in the top right corner of the camera
display and a date and time stamp at the bottom.
• When the 'Add timestamp on record' checkbox is checked, date and time are shown on the
recorded file.
Note: set the time via the For Administrator screen (see further).
• Press the snapshot button
layouts, select the desired camera display first by left clicking on it. A new window with the
picture is opened. Press the Save button and select the desired location to save the picture.
• Press the view button
viewing.
• At the bottom of the left pane, 9 possible cameras are shown. Unavailable cameras are greyed
out.
• Press on the
Notes:
• When an icon is pressed, it changes to the stop icon
function.
• The recorded file name is cameraname_timestamp.avi
e.g.
• The path where the movies will be stored can be set by the administrator in the For
Administrator screen (see further).
For Operator layout
• When entering an administrator password, the user can open the For Operator layout.
• Check the Flip checkbox in case the image is shown upside down.
• Check the Mirror checkbox to mirror the image.
• Set the resolution to 320*240, 640*480 or Max.
• Set the mode to 50Hz, 60Hz or outdoor.
Note: the camera is not suitable for outdoor use! The outdoor setting could be used in case the
camera is pointed towards a bright natural light source.
• Set the brightness and contrast of the image with the "+" and "-" buttons.
13.01.2011
to take a snapshot of the camera display. In multiple screen
to start viewing the camera images, press the stop button
icon to start recording the selected cameras' images.
Counter_20081211134442.avi
CAMIP7
. Press this icon to stop the underlying
9
to stop
©Velleman nv