Software Set-Up - Velleman CAMIP7 Bedienungsanleitung

• Click Next again.
• To finish software installation, the computer must be restarted. Select 'Yes I want to restart my
computer now' and click on Close.
• After reboot, the IP Camera Tool icon appears on the desktop.
Mac
• Locate and open the folder "For MAC".
• Open the folder "IP camera Tool" and copy the tool to your MAC to use it.

8. Software set-up

• Make sure all connections are properly made (see also §6) and double click on the IP Camera
Tool icon to start the software.
8.1 IP Camera Tool
• The software starts searching for cameras over the LAN. 3 Situations can occur:
o No cameras are found on the LAN. If after 1 minute the software does not detect any cameras,
check all cabling of the system and make sure the camera is powered.
13.01.2011
CAMIP7
5
©Velleman nv