Signs And Symbols; Product Information; Technical Data - Mafell S 200 Originalbetriebsanleitung

1

Signs and symbols

2

Product information

in respect of the high volume dust extractors S 200 with Art.-No. 91A301, 91A320, 91A321 or 91A325 and in
respect of container Art.-No. 206869.
All specifications and information in respect of the upper part of the dust extractor can be referenced in the
operating instructions (Art.-No. 170425 and 170426) of dust extractor S 35 M.
2.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218
2.2 Device identification
All information required for device identification is available on the rating plate attached to the motor casing.

2.3 Technical data

Dimensions
Weight (without accessories)
Maximum permitted total weight for lifting
with a crane
Volume
Diameter suction fitting
This symbol appears at places where you will find instructions for your
own safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get
damaged.
This symbol indicates tips for the user and other useful information.
CE symbol to document compliance with the basic safety and health
requirements according to Appendix I of the Machinery Directive.
To reduce the risk of injury, please read the operating instructions.
-12-
720 x 670 x 1120 mm (15.354 x 20.629 x
29.645 in.)
38 kg (83.77 lbs)
70 kg (154.32 lbs)
200 l
Ø 66/58 mm