Inhaltsverzeichnis
Werbung
SAVe THeSe INSTRUCTIONS
Operating instructiOns
turning the lamp On
• plug cord into the base of the lamp.
• plug lamp into outlet.
• turn on power button (the timer will be illuminated once the lamp is on).
• lamp is now ready for use.
alignment
guides
fingertip
front
pads
Wall
PEDICURE PlACEMENT: place client's foot
into the center of the lamp between the
outside alignment guidelines, 1/2 inch (1.27cm)
away from front reflective wall. clean lamp in
between each service.
USINg pReSeT CONTROLS
• the CND™ led lamp features 4 preset controls calibrated to perfectly cure CND™ shEllAC™ and BRIsA™.
• select appropriate button based on service being performed.
• timer will count down to zero, you will hear a beeping sound, and bulbs will automatically shut off.
1
2B
UNIvERsAl BAsE CoAT
BRIsA™ AND BRIsA™ lITE
BRIsA™ bond
BRIsA™ sculpting gel
BRIsA™ lite
BRIsA™ paint
removable base coat
BRIsA™ lite sculpting gel
CND™ shEllAC™
BRIsA™ lite
base coat
smoothing gel
10 secOnds
60 secOnds (1 minute)
for best service results, ensure proper p.e.p. of nails.
15-CND-0318-LED Lamp Inst Booklet-NA_EU-FN.indd 4-5
MANICURE PlACEMENT: place client's hand so
that fingers are centered within the alignment
guides on the bottom of the lamp. ensure
fingers are in the fingertip pads. thumb should
be resting in the appropriate thumb pad; all
other fingers will follow. for longer nails, move
the hand slightly back.
buttOn pad
2s
3
UNIvERsAl ToP CoAT
CND™ shEllAC™
all CND™ shEllAC™
BRIsA™ gloss
color coats
BRIsA™ lite
removable top coat
CND™ shEllAC™
top coat
CND™ shEllAC™
XPREss5™ top coat
60 secOnds (1 minute)
60 secOnds (1 minute)
CND™ shEllAC™
• apply a thin layer of CND™ shEllAC™ base coat to all five nails. seal extension edge.
cure using button 1.
• apply a thin layer of CND™ shEllAC™ color coat. seal extension edge. cure using button 2s.
repeat this step.
• apply a thin layer of CND™ shEllAC™ XPREss5™ top coat to all five nails. seal extension edge.
cure using button 3.
• remove the top film (sticky inhibition layer) with a plastic-backed, lint-free pad soaked with
99% isopropyl alcohol (ipa).
CND™ BRIsA™
• apply a thin layer of CND™ BRIsA™ bond to all five nails. seal extension edge. cure using button 1.
• create your nail enhancement on all five fingers using CND™ BRIsA™ sculpting gels and/or CND™ BRIsA™
paint, curing after each individual product application by using button 2B. repeat this step as needed.
• apply a thin layer of CND™ BRIsA™ gloss to all five nails. seal extension edge. cure using button 3.
• remove the top film with a plastic-backed, lint-free pad soaked with 99% isopropyl alcohol (ipa).
CND™ BRIsA™ lite
• apply a thin layer of CND™ BRIsA™ lite removable base coat to all five nails. seal extension edge.
cure using button 1.
• create your nail enhancement on all five fingers using CND™ BRIsA™ lite smoothing gel and/or
CND™ BRIsA™ lite sculpting gel, curing after each individual product application by using button 2B.
repeat this step as needed.
• apply a thin layer of CND™ BRIsA™ lite removable top coat to all five nails. seal extension edge.
cure using button 3.
• remove the top film with a plastic-backed, lint-free pad soaked with 99% isopropyl alcohol (ipa).
maintaining the lamp:
• Keep lamp dust free by unplugging lamp and wiping it down with a pre-moistened towelette
to avoid exposing lamp to excess moisture.
WARRANTY INFORMATION
(US / CANADA ONLY)
Creative Nail Design, Inc. (CND™) warrants this led lamp to be free from defects in material and
workmanship for one (1) year from the date of purchase. void where prohibited. void when lamp is not
purchased via recognized CND™ distributors. Warranty may be voided if lamp is not used according to
CND™ instructions for use and maintenance.
the obligation of CND™ under this warranty shall be limited to replacement during the warranty period of
any part that proves defective in material or workmanship provided that the proper service procedure has
been followed as outlined below.
this warranty of defects in materials or workmanship does not extend to normal wear and tear, any products
or parts that have been lost or discarded by you, and it does not extend to defects in products or parts
caused by misuse, accident, improper installation, or use in violation of instructions furnished by CND™,
or to units that have been altered or modified without CND™'s authorization. CND™ shall in no event be
responsible for consequential damages of any nature or amount. CND™ reserves the right, at its absolute
discretion, to determine the validity of any led lamp warranty claim. CND™'s decision shall be final.
purchaser respOnsibility
as the purchaser of this led lamp, your responsibility under the warranty is as follows:
• register lamp by visiting CND.com/lEDlampWarranty.
• retain the dated purchase receipt.
• notify CND™ within thirty (30) days of discovering a defect in materials or workmanship of the led lamp.
• follow service procedure as outlined below.
u.s. and canada - service prOcedure
should a defect in material or workmanship of the CND™ led lamp be discovered within one (1) year of
purchase date, and not from any actions that would void the warranty, contact CND™ customer service
at 1.800.833.NAIl within thirty (30) days of the discovered defect.
Once the defect has been verified, the led lamp will be replaced free of charge. this process usually
takes 2-4 weeks. do nOt send the led lamp to CND™ prior to contacting customer service and receiving
a return authorization number. any led lamp returned without the required return authorization number
may become lost and replacement may not be possible.
Outside Of the u.s. and canada - service prOcedure
if you purchased your CND™ led lamp outside the u.s. or canada, contact the seller for warranty service.
4/9/15 8:43 AM
Werbung
Inhaltsverzeichnis
