Mechanical Mounting - Gemü 1436 cPos Kurzanleitung
Intelligenter stellungsregler
Vorschau ausblenden
Andere Handbücher für 1436 cPos:
- Originalbetriebsanleitung (64 Seiten) ,
- Betriebsanleitung (56 Seiten) ,
- Original kurzanleitung (24 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
1
Notes for your safety
2
Mechanical mounting
2.1
Mounting to linear actuators
2.2
2.2.1 Preparation of the valve actuator
2.3
2.3.2 Assembling the travel sensor
2.3.3 Checking the mounted assembly
3
4
4.1
4.2
4.3
4.4
5
5.1
6
6.1
Menu structure
6.2
Menu structure
6.3
Menu structure
6.4
Menu structure
6.5
1
Notes for your safety
Please refer to the safety notes included
in the GEMÜ 1436 cPos
instructions on the enclosed CD-ROM.
If you do not have this CD-ROM, please
contact GEMÜ.
7
7
7
7
7
8
8
8
9
9
9
9
9
9
9
9
10
10
10
11
11
11
12
14
14
16
18
20
22
operating
®
2
Mechanical mounting
2.1
Mounting to linear actuators
2.1.1
Preparation of the valve actuator
The actuator must be in the zero position
G
(actuator vented).
Should there be an optical position
G
indicator in the actuator (a red spindle), it
must be removed.
2.1.2
Assembling the travel sensor
The travel sensor is assembled using a
mounting kit 1436S01Z... consisting of a
spring, an operating bush and a threaded
adapter (if applicable).
The mounting kit depends on the valve type.
Pretensioned spring!
® Damage to the device.
● Slowly relax spring.
Damage to the spindle surface may
lead to failure of the travel sensor!
1. Pull out the spindle of the travel sensor
up to the limit stop.
Travel sensor
2. Push the spring over the spindle.
3. Fix the spindle at point a - (the spindle
must not be damaged during this
process).
Travel sensor Spindle
4. Screw the operating bush onto the
spindle.
a
7 / 24
CAUTION
CAUTION
a
Spring
Operating bush
1436 cPos
®
Werbung
Kapitel
Inhaltsverzeichnis
