Mechanical Mounting - Gemü 1436 cPos Kurzanleitung
Intelligenter stellungsregler
Vorschau ausblenden
Andere Handbücher für 1436 cPos:
- Originalbetriebsanleitung (64 Seiten) ,
- Betriebsanleitung (56 Seiten) ,
- Kurzanleitung (24 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
1
2
2.1
2.1.1 Preparation of the valve actuator
2.1.2 Assembling the travel sensor
2.1.3 Mounting the positioner
2.2
2.3
2.3.3 Checking the mounted assembly
3
4
4.1
4.2
4.3
4.4
5
5.1
6
6.1
6.2
6.3
6.4
6.5
1
Please refer to the safety notes included
in the GEMÜ 1436 cPos
instructions on the enclosed CD-ROM.
If you do not have this CD-ROM, please
contact GEMÜ.
Downloaded from
www.Manualslib.com
Notes for your safety
Mechanical mounting
Mounting to linear actuators
Menu structure
Menu structure
Menu structure
Menu structure
Notes for your safety
operating
®
manuals search engine
2
Mechanical mounting
7
2.1
Mounting to linear actuators
7
7
2.1.1
Preparation of the valve actuator
7
7
The actuator must be in the zero position
G
8
(actuator vented).
Should there be an optical position
G
indicator in the actuator (a red spindle), it
8
must be removed.
8
9
2.1.2
Assembling the travel sensor
9
The travel sensor is assembled using a
9
mounting kit 1436S01Z... consisting of a
9
spring, an operating bush and a threaded
9
adapter (if applicable).
9
The mounting kit depends on the valve type.
9
CAUTION
9
10
Pretensioned spring!
10
® Damage to the device.
10
● Slowly relax spring.
11
CAUTION
11
Damage to the spindle surface may
11
lead to failure of the travel sensor!
1. Pull out the spindle of the travel sensor
12
up to the limit stop.
14
14
Travel sensor
16
2. Push the spring over the spindle.
3. Fix the spindle at point a - (the spindle
18
must not be damaged during this
process).
20
22
Travel sensor Spindle
4. Screw the operating bush onto the
spindle.
a
7 / 24
a
Spring
Operating bush
1436 cPos
®
Werbung
Kapitel
Inhaltsverzeichnis
