Klarstein 10031436 Bedienungsanleitung Seite 31

8 LED Press this button can turn on or turn off the LED light on the panel.
Timer On setting: Signal „ON" will blink and display, signal [ ] 9will conceal, the numerical
section will become the timer on setting status. During 5 seconds blink, by pressing + or -
button to adjust the time value of numerical section, every press of that button, the value
will be increased or decreased 1 minute. Hold pressing + or - button, 2 seconds later, it
TIMER quickly change, the way of change is: During the initial 2.5 seconds, ten numbers change in
9
ON the one place of minute, then the one place is constant, ten numbers change in the tens
place of minute at 2.5 seconds speed and carry. During 5s blink, press the Timer button,
the timer setting succeeds. The Timer On has been set up, repress the timer On button,
the Timer On will be canceled. Before setting the Timer, please adjust the Clock to the
current actual time.
Press this button, could select displaying the indoor setting temperature or indoor ambient
temperature. When the indoor unit firstly power on it will display the setting temperature, if
the temperature's displaying status is changed from other status to [ ] displays the ambient
temperature, 5s later or within 5s, it receives other remote control signal that will return to
display the setting temperature. if the users haven't set up the temperature displaying status,
that will display the setting temperature. (This function is applicable to partial of models)
10 TEMP
Press this button, (When displaying [
playing [
be changed. If current displays indoor ambient temperature, if received the other remote
control signal, it will display presetting temperature, 5s later, will back to display the ambient
temperature.
TIMER Once press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will
11
OFF blink. The method of setting is the same as for TIMER ON.
In Cool or Heat mode, press this button can turn on or turn off the Turbo function. After
12 TURBO turned on the Turbo function, its signal will be displayed. When switching the mode or
changing fan speed, this function will be canceled automatically.
Press this button, Sleep On and Sleep Off can be selected. After powered on, Sleep Off is
defaulted. After the unit is turned off, the Sleep function is canceled. After Sleep function
13 SLEEP
set up, the signal of Sleep will display. In this mode, the time of timer can be adjusted.
Under Fan and Auto modes, this function is not available.
Press LIGHT button to turn on the display's light and press this button again to turn off the
14 LIGHT displays light. If the light is turned on [ ] is displayed. If the light is turned off, the symbol
still stays.
31
] will display indoor ambient temperature, [
] ), will display presetting temperature; (when dis-
] current displaying status will not