Kenwood AT264 Bedienungsanleitung Seite 9

using the cutting plates
1 Remove the medium speed outlet
cover by lifting off.
2 Place the drive shaft onto the outlet.
3 Fit the bowl over the drive shaft with
the handle above the on/off and
speed switch and turn clockwise
until it locks into position.
4 Place the cutting plate onto the drive
shaft. Your chosen cutting side must
be uppermost. Handle the
cutting plates with care - they
are extremely sharp. Hold the
plates by the centre grip.
5 Fit the lid, feed tube above the
speed switch and turn clockwise
ensuring that the tab on the lid slots
into the groove in the bowl handle.
When correctly fitted the markings
should align
●
The attachment will not
operate if the lid is not locked
correctly, or if the high speed
outlet cover is not fitted.
6 Choose which feed tube you want to
use. The pusher contains a smaller
feed tube for processing individual
items or thin ingredients.
to use the small feed tube
●
First put the large pusher inside the
feed tube.
to use the large feed tube
●
Use both pushers together.
7 Put the food into the feed tube.
.
8 Switch on and push down evenly
with the pusher - never put your
fingers in the feed tube. We
recommend a medium speed for
processing soft foods such as
cucumber and a medium/high speed
for processing firmer foods such as
carrots and hard cheese.
9 Switch off and unplug.
10 Remove the attachment.
11 Refit the medium speed outlet cover
after use.
hints
●
Use fresh ingredients.
●
Don't cut food up too small. Fill the
width of the large feed tube fairly full.
This prevents the food from slipping
sideways during processing.
Alternatively, use the small feed tube.
●
When slicing or shredding: food
placed upright comes out shorter
than food placed horizontally.
●
After using a cutting plate there will
always be a small amount of waste
on the plate or in the food.
cleaning
bowl, lid and attachments
●
Wash by hand then dry. Take care as
the blades and cutting plates are
sharp.
●
Alternatively they can be washed on
the top rack of your dishwasher. A
short low temperature programme is
recommended.
After use store the knife blade in the
processor bowl.
5