Menu Overview - Raychem HWAT-ECO Bedienungsanleitung

22-6-2011 09:13
Maintain
Back to "Quick install"
The Setup menu (see next chapter) has a Reinitialise menu to start over again.
Previous settings are returned to default factory settings, except time and date.
Note:
A menu can be consulted if further detailed settings (eg. Master/slave, BMS,
etc.) are required. You must press a key to access the menu inside the
HWAT-ECO. (Pressing ESC shows the current preferred cable temperature.)
Pressing another key shows the main menu. There are 6 main menus:
Language, Time and Date, Setup, Timer program, Holiday and Info.

3.2 Menu overview

1 Language
2 Time and Date
3 Setup
16
*
English
Deutsch
Francais
Dansk
Italiano
Cesky
1 Year
2 Month
3 Day
4 Hour
5 Minutes
1 Maintain Temp
2 Economy Temp
3 Cable Length
4 Ambient Temp.
5 Pipe Diameter
6 Insulation
7 Power Corr
8 Trace Boiler
9 Lock
10 BMS
11 NetworkMaster
12 Reinitialise
13 Alarm sound
Select Year
Select Month
Select Day
Select Hour
Select Minutes
"Enter maintain temp."
"Enter economy temp."
"Enter cable length"
"Enter ambient temp."
Select 15 mm up to 100 mm
Select 9 mm up to 100 mm
Select 60% up to 140%
Select Off or On
Lock/unlock Setup and Timer menus
Select Yes/No
Select Yes/No
Select Yes/No
Select into different modes: continuous,
10 minutes, 1 minute, 10 seconds or off.