ENGLISH
How to clean the filter system
1 Separate the filter from the tank cover.
2 Put the filter system into salty water for 24 hours.
3 Take the filter system out of the salty water; shake several times, rinse it with
clean water.
4 Dry thoroughly and store in a plastic bag. Keep it in a cool place out of direct
sunlight.
How to clean the transducer
1 Put 5-10 drops of vinegar on the surface of the transducer and leave for 2-5
minutes.
2 Remove the incrustation from the surface.
3 Use a clean dry cloth to wipe the transducer.
How to clean the basin unit:
If you find dirt or any incrustation on it, use detergent and wipe clean with a cloth
9. TECHNICAL SPECIFICATIONS
Model: 89026 Humidifier/Ozonizer
Electrical supply: 220 - 240V 50/60Hz
Humidifying power: 30 W
Water tank capacity: 3.5 l.
Maximum evaporation rate: 300 ml/h
Minimum evaporation rate: 120 ml/h
Noise level: <35 dB
10. INFORMATION ON DISPOSAL OF BATTERIES AND PRODUCT
· Remember to dispose of the product responsibly.
· Do not mix products bearing the crossed -out bin symbol with
your general household waste.
· For the correct collection and treatment of these products take
them to the collection points designated by your local authority.
Alternatively contact the retailer who sold you the product.