Herunterladen Inhalt Inhalt Diese Seite drucken

miniland baby ozonball Bedienungsanleitung Seite 11

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
ENGLISH
6. INSTRUCTIONS FOR USE
1. Place the machine on a flat surface.
2. Fill the water tank with water and close so that it is airtight
2
1
3
4
WATER
3. Fasten the water tank to the main body of the machine.
4. Plug in.
5. Turn the machine on. When the light on the display comes on it will start to
work.
6. Press the MAX / MIN button on the machine or on the remote control,
depending on the intensity that you require. This setting will become automatic
when a relative humidity is set.
7. Press the OZONE button so that this function starts to work. A tree shape will
appear on the LCD display. If you do not need this function, press again and it will
stop.
8. Constant humidity: Before you press the HUMIDITY button, the present
humidity level will show up on the display. The humidity level must be maintained
between 45% RH and 90% RH.
Press once and the humidity level will increase by 5% RH. When it reaches the
maximum (90% RH), press again and it will go back to 45% RH. After the desired
humidity level has been determined, this will automatically be stored in the
memory. After a 5-second pause, the display will show the present humidity level
again. If the humidity setting is less than the present humidity, the machine
will go on pause mode. However, if the expected humidity level is higher than
the present one, the humidification will work automatically.
9. Time settings: There are 5 different time settings: 2,4,6,8 and 10 hours. Press
the "TIMER" button. The display will show a clock shape. The timer will show the
remaining time and will decrease by 2 hours. For example, if the timer is
programmed for 10 hours, the display will show 8 after 2 hours.
10. Finally, if the deposit does not contain sufficient water, the machine will not be
able to continue functioning and will automatically stop. There will be a brief beep
during 10 seconds and then the icon "insufficient water" will appear on the display.
Unplug and fill the water deposit up again, then turn the machine back on.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis