VDO M6 Bedienungsanleitung Seite 53

M6
Settings – total values – altitude loss
The next digit on the left starts to flash and is ready
to be set.
Press the BIKE or TPC button to set the value of this digit.
Press the SET button to confirm your setting.
Once all the digits have been set, confirm the setting by
pressing the SET button.
The response "Set OK" appears on the display.
If you want to configure further settings,
press the BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M6 returns to function mode.
53