Hitachi RAF-25QH8 Bedienungsanleitung Seite 13

2
Set the current time with
the TIMER control button.
PM
Example: The current time is 1:30p.m.
2
Set the turn-off time with the
TIMER control button.
PM
2
Set the turn-on time with the
TIMER control button.
AM
4
Set the turn-on time with the
TIMER control button.
PM PM
AM AM
• The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the current time
at first because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press the
button is order to use the same settings next time.
3
Press the (TIME) button
again. The time indication starts
lighting instead of flashing.
PM
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (OFF) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
PM
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
AM
5
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
PM PM
AM AM
– 13 –
• The time indication will disappear automatically in
10 seconds.
• To check the current time setting, press the
button twice.
The setting of the current time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn off at 11:00p.m.
The setting of turn-off time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on at 7:00 a.m.
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn off at 10:30p.m. and it will be
turned on at 7:00 a.m.
The settings of the turn-on/off time are now
complete.
(TIME)
(RESERVED)
(RESERVED)
(RESERVED) sign
(RESERVE)