Siemens sitrans RD200 Betriebsanleitung Seite 61

Pushbutton
Menu
Right Arrow
Up Arrow
Enter/Ack
Right Arrow & Menu held for 3 seconds enters Advanced Features
Max/Min Mode
While in Run Mode, pressing Up Arrow will initiate Max/Min Mode. Up Arrow
toggles between Max & Min displays, and Right Arrow resets the Max/Min to the
current value. Press Menu or wait 10 seconds to return to Run Mode. Pressing
Enter/Ack will disable the 10 second timeout and continuously display Max or Min.
Press & hold Right arrow and
Menu for 3 seconds to access
Advanced Features Menu
TC or RTD?
Yes No
Adjust
Filter
Bypass
Serial
Copy
Select
TC or RTD?
Yes No
Initial
Calibrate
Diagnostics
7ML19985JS31
Function
Go to Programming Mode or leave Programming, Advanced
Features, and Max/Min Modes.
Move to next digit.
Move to next selection or increment digit.
Accept selection/value and move to next selection.
When the meter is locked, Adjust,
Filter and Bypass can only display
their settings, and the Copy and
ICAL functions are not available.
Right Arrow &
Menu for 3
Advanced
seconds
Features
Menu
Send
Linear
Sq. Root
Function
cutoff
output
Intensity
SITRANS RD200 – BETRIEBSANLEITUNG
Operational Modes
Up Arrow
Run
Menu
Menu
Program
Protocol
TX Delay
Modbus?
No Yes
Byte-to-byte
Max &
Min
Menu
Modbus
PDC
Address
Baud
Parity
timeout
Seite 57