Special Instructions - Husqvarna TS 400 F Betriebs- Und Wartungsanleitung

This symbol indicates that the machine
is in conformance with the applicable
European directive.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe and
reliable service in operating conditions correspon-
ding with the instructions, but it can present dan-
gers for the user and risks of damage, conse-
quently regular on site inspection is necessary to
ensure :
• Perfect technical condition (use for the purpo-
se for which it is intended and taking into
account any risks, and correction of any mal-
function detrimental to safety).
• Use of a diamond disc for water lubricated cut-
ting of marble, stone, granite, brick and facings
(porcelain, glazed tiles, ceramics, etc). The
use of any other disc is forbidden (abrasive,
saw, etc).
• Competent personnel (qualifications, age, trai-
ning, education) who have studied the manual
in detail before starting work: any fault of an
electrical or other nature must be checked by
a competent person (electrician, maintenance
foreman, authorized dealer, etc).
• That the warnings and instructions marked on
the machine are followed (adequate personal
protection, correct use, general safety instruc-
tions, etc).
• That no modification, transformation or addi-
tion is detrimental to safety and that it is car-
ried out without prior authorization from the
manufacturer.
• Respect of the maintenance intervals and per-
iodical checks recommended.
• That only genuine spare parts are used for
repairs.
MANUFACTURER
TYPE TYPE
WEIGHT MASSE UTILE
MAXI TOOL Ø MAXI OUTIL
BORE Ø ALESAGE
SPEED T/MN - RPM
1 Use
• Use : Sawing marble, stone, granite, brick,
cement and all facings (porcelain, glazed tiles,
ceramics, etc).
20
Instruction plate
N° SERIE
ANNEE DE
FABRICATION
K g PUISSANCE kW
PLAGE DE
m m V
TENSION
m m FREQUENCE Hz
INT. UTIL. A
AL
Carborundum
Any application not corresponding with the
intended use (use of a saw blade, abrasive
disc, etc) is prohibited.
2 Technical specifications
POWER
2 kW (2,7CV)
2,9 kW (4CV)
1,5 kW (2CV)
• Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 55
• Depth of cut (E) :
- at 90° : Ø 350 = 100mm - at 45° : Ø 350 =50mm
- at 90° : Ø 400 =125mm - at 45° : Ø 400 =65mm
• Length of cut (L) : E = 15 - 580mm
• Useable width (to the right)) (l) : E<110
• Dimensions (mm) L x l x h :
- 1120 x 600 x 1330 (with legs)
- 1120 x 600 x 680 (bench)
• Unladen weight : 96 kg (
- chassis : 66 kg
- head : 30 kg
• Disc cooling by water spray into the disc casing
• Minimum tank capacity : 40 liters.
• Water pump : 13 W - débit : 8 l/mn.
SERIAL
• Electricity supply :
FABRICATION
YEAR
- 230 V : H07-RNF 3 x 1,5
POWER
- 400 V : H07-RNF 4 ou 5 x 1,5
VOLTAGE
- 115 V : H07-RNF 3 x 2,5
FREQUENCY
INTENSITY
MODEL
2kW - 230V
2,9kW - 400V
1,5kW - 115V
• Tools : Water lubricated diamond
T
disc diameter 300 mm - diameter
350xmm (D)- bore 25.4 mm (AL).
(Information from your usual sup-
D
plier).
disc
VOLTAGE CURRENT
± 5 %
230 V 50 Hz 10 A
400 V 50 Hz 11,5A
115 V 50 Hz 20 A
: E = 50 - 550mm
= 300mm.
: E>110 =285mm
depending on model
- Lg 3 m.
2
2 - Lg 3 m.
POWER PRESSURE
LEVEL LEVEL
LWA (DB) LPA (DB)
EN ISO 3744 EN ISO 4871
102 82
104 97
100 78
Saw blade
PUMP
13 W 230 V
13 W 230 V
30 W 115 V
)
- Lg 3 m.
2
VIBRATION
LEVEL
G ENV
25349
0,03
0,03
0,04