Special Instructions - Husqvarna TS 500 M Betriebs- Und Wartungsanleitung

This symbol indicates that the
machine is in conformance with
the applicable European directive.
MANDATORY
WARNING
These signs give advice
concerning your safety
Instruction plate
MANUFACTURER
TYPE TYPE N° SERIE
ANNEE DE
FABRICATION
WEIGHT MASSE UTILE Kg PUISSANCE
PLAGE DE
MAXI TOOL Ø MAXI OUTIL. mm
TENSION
BORE Ø ALESAGE mm FREQUENCE
SPEED T/MN - RPM INT. UTIL.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe
and reliable service in operating conditions
corresponding with the instructions, but it
can present dangers for the user and risks
of damage, consequently regular on site
inspection is necessary to ensure :
• Perfect technical condition (use for the
purpose for which it is intended and
taking into account any risks, and
correction of any
detrimental to safety).
• Use of a diamond disc for water
lubricated cutting of marble, stone,
granite, brick and facings (porcelain,
glazed tiles, ceramics, etc). The use
of any other disc is forbidden
(abrasive, saw, etc).
• Competent personnel (qualifications,
age, training, education) who have
studied the manual in detail before
starting work : any fault of an electrical
or other nature must be checked by a
competent person (electrician,
maintenance foreman, authorized
dealer, etc).
• That the warnings and instructions
marked on the machine are followed
(adequate personal protection, correct
use, general safety instructions, etc).
• That no modification, transformation
or addition is detrimental to safety and
that it is carried out without prior
authorization from the manufacturer.
• Respect of the maintenance intervals
and periodical checks recommended.
• That only genuine spare parts are
used for repairs.
1 Use
• Use : Sawing concrete blocks, cellular
concrete, refractory bricks, etc.
• Tools :
Diamond/abrasive blade
- Ø 400 to 600 mm
- bore 25.4 mm (1")
Saw blade
Carborundum
disc
Any application not corresponding with
the intended use (use of a saw blade,
abrasive disc, etc) is prohibited.
2
Technical specifications
• Blade shaft RPM :
INDICATION
- electric : 1600
INFORMATION
- petrol : 2045
INSTRUCTION
• Electrical protection : IP 55.
• Depth of cut :
- 160 mm with Ø 400 mm
PROHIBITION
- 180 mm with Ø 450 mm
- 200 mm with Ø 500 mm
- 240 mm with Ø 600 mm
• Length of cut : 520 mm
• Dimensions (mm) (L x W x H) :
1400 x 690 x 1550
• Unladen weight : 150 à 175 Kg
• Disc cooling by water spray into the disc
SERIAL
casing.
FABRICATION
YEAR
• Minimum tank capacity : 57 liters
kW POWER
V VOLTAGE
• Water pump : 14 l/mn
Hz FREQUENCY
• Electricity supply :
A INTENSITY
- 230 V : H07-RNF 3 x 1,5
- 400 V : H07-RNF 5 x 1,5
- 110 V : H07-RNF 3 x 2,5
POWER
MODEL
Lwa (dB)
EN ISO 3744
1,5 KW 110 V
2,2 KW 240 V
7,5 KW 440 V
HONDA
malfunction
GX160
Inspection-Description of the
3
machine
• On receiving the machine check its
condition.
• Always keep it perfectly clean.
• Check the supply cable and the extension
lead periodically.
• Always keep alert when working.
• Check the mounting of the components
(abnormal vibration).
VEASE FIG. 1
11 - Chassis-tank
12 - Rear wheel
13 - Front wheel
14 - Water pump
15 - Head locking handle
16 - Adjustable wheel
17 - Set of spanners
18 - Drain plug
19 - Motor
10 - Circuit breaker
11 - Operating handle
12 - Disc casing
13 - Screen
14 - Movable table
15 - Table stop
16 - Movable table stop
17 - Manufacturer's plate
18 - Pedal
19 - Stop
20 - Tap
21 - Clamping wheel
2 - L 3 m
2 - L 3 m
2 - L 3 m
PRESSURE VIBRATION
LEVEL LEVEL LEVEL
Lpa (dB) G ENV
EN ISO 4871 25349
186 70 0,21
189 76 0,13
186 82 0,23
106 94 1
Handling - transport
4
[ 2]
VEASE FIG.
• Can be transported on 4 wheels
• Front wheel lock
• Fork rail
5
Inspection before starting
Please read the instructions for
use prior to operating the
machine for the first time.
The use of ear protection is
mandatory.
The operator must wear
protective
appropriate to the work he
is doing. We recommend
that this includes both eye
and ear protection.
The working area must be
completely cleared, well lit and
all safety hazards removed (no
water or dangerous objects in
the vicinity).
Any persons not involved in the
work should leave the working
area.
Use blades suitable for the work
to be done (speed, geometry,
application, etc.).
Take into account the working
conditions from a health and a
safety point of view
• Petrol engine machine (consult the
engine maintenance manual)
- Check that the fuel tank is full.
- Check that the engine oil level is
correct. As the engine often operates at
an angle, check the oil level (with the
engine horizontal) frequently to ensure
that it never falls below the second
mark on the dipstick.
- Don't let run the motor under its speed,
the rotation speed is given by the
maximum lever positioning.
- For starting up refer to the engine
handbook.
clothing
10