Mastervolt - Mastervolt IVO Smart 12/10 Betriebsanleitung

OVERVIEW
Figure 2 – Abbildung 2 – Figuur 2 – Figura 2
EC declaration of confirmity
Manufacturer

Mastervolt

Address Snijdersbergweg 93, 1105 AN Amsterdam , The Netherlands
Herewith declares that product::
43011000 IVO Smart 12/10
43020600 IVO Smart 24/06
Is in conformity with the provision of the EC, EMC directive 89/336/EEC and amendments 92/31/EEC,
93/68/EEC
The following harmonized standards have been applied:
Generic emission standard EN 50081-1:1992,
Generic immunity standard EN 50082-1:1997,
And the safety directive 73/23/EEC and amendment 93/68/EEC, with the following standard:
Low voltage standard EN 60950:2000,
Amsterdam,
R.J. ter Heide,
General Manager MASTERVOLT
2
IVO SMART 12/10 & 24/6
Settings and Connections
1 RJ12 Jack, connection low battery,
CSI alarm and PC
2 LED indicator,
flashing = BULK/ABSORPTION,
continuous = FLOAT
3 Remove jumper for diode compensation
4 Remove jumper for gel / AGM setting
5 Remove jumper for force float
6 In-line DC fuse