2 Installation and Commissioning
LED displays
Reset button
C -PLUG
Figure 2-1
Notice
Important notes on installation and operation:
S
The module must be installed so that its upper and lower ventilation slits are
not covered, allowing adequate ventilation.
Note
You can connect to PROFIBUS even with the power switched on.
Note
The requirements of EN61000-4-5, surge test on power supply lines, are met only
when using a Blitzductor VT AD 24V type no. 918 402 .
Manufacturer:
DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306
Neumarkt, Germany
6
Power supply
IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9
Attachment to PROFIBUS:
9-pin D -sub female
connector
Antenna:
Attachment to Ind. Wireless
LAN
Release 1/2005
C79000-G8976-C200-01_vorabversion_01