Setting The Admin Password Over A Secure Connection - Eneo NXB-980IR37M Sicherheitshinweise Und Betriebsanleitung

Setting the admin password over a secure connection

To gain access to the product, the password for the default administrator
user must be set. This is done in the "Admin Password" dialog, which is
displayed when the network camera is accessed for the setup at the first
time. Enter your admin name and password, set by the administrator.
NOTE: The default administrator username and password is
"admin". If the password is lost, the Network Camera must be
reset to the factory default settings. See "Resetting to the Factory
Default Settings".
18