auna 10026825 Bedienungsanleitung Seite 16

User instructions
Loading a disc
1: Press the OPEN button to open CD/CDG
compartment door. Place a disc in the compartment
with the printed side facing upwards.
2: Gently close the CD door to the CD/CDG
compartment. The karaoke system begins to read
the disc.
3: Press PLAY/ PAUSE to play the disc. If no disc is
loaded "--" will appear on the display.
NOTE: Refer to the Trouble Shooting Guide on
page 8 if a disc is loaded but the total tracks do
not appear.
Playing a CD or CD+G disc
1: Adjust the MASTER VOLUME control on your unit, TV
or audio system to a comfortable level.
2: Adjust the MIC VOLUME/A.V.C/ECHO/BALANCE
controls as needed to achieve the desired mix of
music and vocals through your sound system.
3: Do not press the disc OPEN button of the CD
compartment during playback.
4: Never place anything except a compact disc on the
disc tray. Foreign objects can damage the unit.
5: Do not apply excessive force to disc cover.
6: Only place one disc on the disc tray at a time.
Play/Pause mode
1: To start playing, press the PLAY/PAUSE button. The
first track [ 1 ] will be displayed on the LED display.
2: To temporarily stop playback, press the PLAY/PAUSE
button.
3: To resume play, press the PLAY/PAUSE button again.
NOTE: Pressing pause when a CDG is playing may
cause distorted lyrics on the monitor.
Any distortion will remain until the whole screen
is refreshed during an instrumental break or you
stop the song and start it from the beginning.
Stop mode
1: Pressing the STOP button during playback will cease
playback and the total number of tracks will be
shown on the LED display.
Page 6
Skip (CD & CDG discs)
1: You can SKIP UP or DOWN to your desired track by
pressing either SKIP
Search (for audio CD disc only)
1: When playing any audio CD, press and hold either
SKIP button (
-SKIP-
high speed in the forward or backward direction.
Normal play will continue when you release either
SKIP button.
Repeat
1: To repeat the track currently playing, press the
REPEAT button once. The REPEAT LED will blink.
2: To repeat all tracks, press the REPEAT button twice.
The REPEAT LED will stay lit.
3: To clear the REPEAT function, press the REPEAT
button again. The REPEAT LED will turn off.
Program
Use this button to program and play back songs in a
preselected order.
1: Programming should be done in the stop mode only.
Press the PROGRAM button. The PROGRAM LED will
illuminate and the display will read [ 0 ].
2: Press the double arrow keys (
desired track.
3: Press PROGRAM button to confirm entry. You can
repeat the same steps up to a maximum of 20 tracks.
4: Press PLAY button when you have completed
programming and you are ready to start singing.
5: Press the STOP button twice to clear all the
programmed entries.
NOTE: the PROGRAM LED will go off when the
programmed sequence is cleared.
or SKIP
button.
). The CD will search at
SKIP ) to select a
16