Installation; Pump Only - Tuthill Sotera SV20A1DBSD Eigentümer-, Einbau-, Betriebs- Und Sicherheitsanleitung

Installation

The SV pump is designed to offer a variety of mounting possibilities, including as a Drum
Pumping Station, and as a Tote Pumping Station. It also features an integral bypass valve to
help minimize wear when the pump is operating with the nozzle closed.
CAUTION! Threaded pipe joints and connections must be sealed with the
appropriate sealant or sealant tape for the fluid being pumped to minimize the
possibility of leaks.

Pump Only

CAUTION! DO NOT mount the pump in a manner or location that will allow it to
sit in standing or flowing water, or rain. Extended exposure to water can and will
damage the motor.
The SV Stainless Steel pump
is designed for year round use
indoors and out. The pump
should be bolted securely to a
solid, stationary surface using
at least 4 bolts.
The SV Stainless Steel pump
can be installed horizontally or
vertically, allowing a variety of
mounting options.
CAUTION! If the pump is to be mounted vertically, it must be mounted with the
pump end DOWN. Mounting the pump end up may cause premature wear and
motor failure.
Pump Base Mounting Hole Configuration
4
Model number,
date code, and
voltage information
can be found here.