Cleaning The Spray Arms; External Cleaning; Internal Cleaning - Electrolux GA60IEEVWE Benutzerinformation

16 www.electrolux.com
5. Make sure that there are no residues
of food or soil in or around the edge of
the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
12. TROUBLESHOOTING
If the appliance does not start or it stops
during operation. Before you contact an
CAUTION!
An incorrect position of the
filters can cause bad washing
results and damage to the
appliance.

11.2 Cleaning the spray arms

Do not remove the spray arms. If the holes
in the spray arms are clogged, remove
remaining parts of soil with a thin pointed
object.

11.3 External cleaning

• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.

11.4 Internal cleaning

• Carefully clean the appliance, including
the rubber gasket of the door, with a
soft damp cloth.
• If you regularly use short duration
programmes, these can leave deposits
of grease and limescale inside the
appliance. To prevent this, we
recommend to run long duration
programmes at least 2 times per
month.
• To maintain the performance of your
appliance at its best, we recommend
to use monthly a specific cleaning
product for dishwashers. Follow
carefully the instructions on the
packaging of the product.
Authorised Service Centre, check if you
can solve the problem by yourself with the
help of the information in the table.