Checking The Supplied Accessories; Installing Batteries; Quick Reference Manual; Using The Cd-Rom Manuals - Sony VPL-SX235 Kurzreferenz

Checking the Supplied Accessories

RM-PJ8 Remote Commander (1)
Lithium battery (CR2025) (1)
The battery is already installed. Before
using the remote commander, remove the
insulation film.
AC power cord (1)
Mini D-sub 15 pin cable (1.8 m) (1) (1-838-
938-11/Sony)
Quick Reference Manual (this manual) (1)
Operating Instructions (CD-ROM) (1)
Projector Station for Network Presentation
application (CD-ROM) (1)

Using the CD-ROM Manuals

Insert the supplied CD-ROM into the
CD-ROM drive of your computer, and the
CD-ROM will start automatically in a few
moments. Select the Operating Instructions
you want to read. If the CD-ROM does not
start automatically, open the "index.htm"
file on the CD-ROM.
You must have Adobe Acrobat Reader 5.0
or higher installed in your computer to read
the Operating Instructions stored on the
CD-ROM.
Installing Projector Station
for Network Presentation
1
Close all running applications.
2
Insert the supplied CD-ROM into the
CD-ROM drive of the computer.
3
Open the CD-ROM and run the
executable file that is appropriate for
your OS.
Windows: When the message "User
Account Control" is displayed, click
"Allow" or "Yes."
4
Follow the on-screen instructions to
install the software.

Installing Batteries

1
Pull out the lithium battery
compartment.
Pull out the battery compartment with a
stick as shown in the illustration.
2
Insert a lithium battery.
Checking the Supplied Accessories
With the 3 (plus)
side facing up.
9
GB