Inhaltsverzeichnis
Werbung
► Avoid all ignition sources such as static electricitysparks, open flames, pilot lights,
hot objects, littobacco products,and sparks from connecting anddisconnecing
power cords or working light switches.
► Fire extinguisher equipment shall be present andworking.
► Keep area clean and free of paint or solvent containers,rags, and other flammable
materials.
► Follow the material and solvent manufacturer's safetyprecautions and warnings.
► Do not spray flammable or combustible materials nearan open flame or sources
of ignition such as littobacco products, motors, and electrical equipment.
► Know the contents of the spray materials and theircleaning solvents. Read all
Material Safety DataSheets (MSDS) and container labels provided with thespray
materials and solvents. Follow the spray materialand solvent manufacturer's safety
instructions.
► Do not use materials with a flashpoint higher than60ºC (140ºF). Flashpoint
is the temperature that afluid can produce enough vapors to ignite
(see coatingsupplies).
Warning!:
Explosion hazard due toincompatible materials. Severe injury orproperty damage
can occur.
To avoid these risks, take the following preventions:
► Do not use bleach.
► Do not use halogenated hydrocarbon solvents such asmethylene and
1,1,1 - trichloroethane. Theyare not compatible with aluminum and may
cause anexplosion. If you are unsure of a material's compatibility with
aluminum, contact your coating supplier.
Warning!:
Spraymaterials, solvents, and other materials can beharmful if inhaled or come in
contact with thebody. Vapors can cause severe nausea, fainting,or poisoning
- 03 -
Werbung
Inhaltsverzeichnis
