Inhaltsverzeichnis
Werbung
► Unscrew the tip collar (#4) and remove all the partsof the spra(#3,#4,#5,#6,#7.#8)
from the sprayer.Remove the spray tip(#9) from the sprayer ( Fig.Q1). Clean all
parts with the cleaning brushin the appropriate cleaning solution (Fig. Q, Fig.Q1).
Be sureto clean around check valve with brush (Fig. Qinsert).
► If using water based material, clean the sprayer byrunning water through pickup
tube inlet as shownin Fig.R. If using oil based materials, clean pickuptube inlet with
the appropriate cleaning solution. Repeat until sprayer is completely clean.
► Dry all parts thoroughly.
► Properly dispose of cleaning solution.
► Place a drop of household oil into the inside of the sprayer from the hole for assembling
the spray tip(Fig. S).
► Reassemble sprayer (Fig. T).
Note: Spray nozzle can only be assembled in onedirection that the notch of
the nozzle(#6) must align with the skirt on spray unit housing(#10). Refer toFig. T1
for properassembly
Note: The spray tip must be assembled in the sprayer with the bumps on the spray
tipin vertical direction
Note: Assemble the pickup tube(#15) andcheck valve (#16) by firmly pushing them
onto the inlet on the sprayer.
► Wrap the air hose around the power unit and put all accessories back into place
MAINTENANCE
Use only mild soap and damp cloth to clean the powerunit. Never let any liquid get
inside the power unit; neverimmerse any part of the power unit into a liquid.
Important!:
To assure product SAFETY and RELIABILITY,repairs, maintenance and adjustment (other
than thoselisted in this manual) should be performed by authorizedservice centers or
other qualified service personnel,always using identicalreplacement parts.The power
unit contains washable/reusable filters(#24).Check the filter before Check the filter
- 16 -
Werbung
Inhaltsverzeichnis
