Inhaltsverzeichnis
Werbung
Large size
surface top
coating
FLOW CONTROL KNOB (Fig. I)
The flow control knob(#19) regulates the amount of liquid thatcan be sprayed. Turning
the flow knob clockwise increasesthe flow of liquid. Turning the knob counter anti-clock
wise decreases the flow of liquid.
Tip: Always test the spray pattern on scrap cardboardor similar material first. Begin
with flow control knob onthe highest flow setting. If less flow is desired, dial the
flow control knob anti-clockwise to decreasethe flow of liquid. Heavier, thicker
materials should besprayed with the flow control knob on high flow setting. Thinner
materials should be sprayed with the flow control knob on low flow setting
FIG. H
FIG. I
- 13 -
for horizontal coating
direction Horizontal
narrow jet for vertical
coatiang direction
Vertical wide jet for
horizontal coating
direction
Horizontal wide jet
for vertical coating
direction
FIG. H1
8
Werbung
Inhaltsverzeichnis
