Inhaltsverzeichnis
Werbung
OPERATION
SPRAY MATERIAL
Clear and semi-transparent
stains and sealers
Oil based primers,
varnishes and polyurethane
Solid color water basedstains
Water based or latexpaints
PREPARATION TIPS
► Always stir and strain the material thoroughly beforeuse
► With any spraying job you should always ensure thatyou have properly prepared the
surface to get the bestfinish.That is, all surfaces are free from dust, dirt,rust and grease.
Lightly pressure wash decks orexterior surfaces and ensure that they are dry beforespraying.
► Even though HVLP sprayers have very little overspray,it is recommended that you mask all
edges and otherareas and use drop cloths to protect your floors andanything else in the spraying
area that you wish toremain untouched.
► Skin that forms on the top of paint can clog thesprayer. Remove skin before mixing. Strain with
► afunnel with a filter attached or through hosiery toremove any impurities that could clog system.
Before starting have gloves, paper towels, rags etc.available for unexpected spills.
THINNING TABLE
Note: Not recommended for textured paint
RUNOUT TIME
No thinning required
(Less than110 seconds runout)
May require thinning(More
than110 seconds runout)
- 10 -
Werbung
Inhaltsverzeichnis
