Ferm CSM1041P Übersetzung Der Originalbetriebsanleitung Seite 3

CIRCULAR SAW
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The pictures mentioned in the text are
corresponding with the pictures at page 2
For your own safety and for the safety of
others, please read these instructions
carefully before using this appliance. It
will help you understand your product
more easily and avoid unnecessary risks.
Keep this instruction manual in a safe
place for future use.
Contents
1. Machine data
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. MACHINE DATA
Technical specifications
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Max sawing depth 90°
Max sawing depth 45°
IP Class
Weight
Lpa (sound pressure level)
Lwa (sound power level)
aw(vibration value)
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Product information
Fig. A
1. Handgrip
2. On/off switch
3. Cut depth clamping knob
4. Power cord
5. Saw blade safety guard
6. Hexagon screw
7. Soleplate
8. Retaining ring
9. Saw blade
10. Parallel guide
11. Parallel guideclamping knob
12. Sawing angle clamping knob
220-240 V
13. Shaft locking knob
50 Hz
14. Angle indicator
1050 W
15. Knob
4900/min
16. Safety switch
Ø185 *20*1.0-1.6mm
17. Carbon brush screw
Ø190*30*1,2-1,6mm
68 mm
Contents of packing
46 mm
1 Circular handsaw
IP 20
4.19 kg 1 Parallel guide
84.54+3 dB(A)
1 Allen key
95.53+3 dB(A)
1.995+1.5 m/s
2
Check first whether or not the delivery has been
damaged by transport and/or whether all the
parts are present.
3