Installation Steps; Package Contents; Recommended Tools - Axis Q6042-C PTZ Installationshandbuch

Installation Guide
This Installation Guide provides instructions for installing AXIS Q6042-C PTZ Dome Network
Camera, AXIS Q6044-C PTZ Dome Network Camera or AXIS Q6045-C Mk II PTZ Dome Network
Camera on your network. For other aspects of using the product, see the User Manual available
at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 19.
4. Install the hardware. See page 23.
5. Access the product. See page 33.

Package Contents

• AXIS Q6042-C PTZ Dome Network Camera, AXIS Q6044-C PTZ Dome Network Camera or
AXIS Q6045-C Mk II PTZ Dome Network Camera
• Clear dome cover (premounted)
• AXIS T8605 Media converter switch
• Multi-connector cable (IP66), 7 m (23 ft)
• Installation and Management Software CD
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key

Recommended Tools

• Wire stripping tool (cable connecting)
• Philips screwdriver PH2 (dome replacement)
• Torx screwdriver T20 (cleaning of the outer heat sink when necessary)
• Torx screwdriver T30 (dome cover removal , bracket adapter AXIS T91A, dome
replacement)
• Torx screwdriver T10 (lid, cable clamping Media Converter Switch)
• Slotted screwdriver 2.5 mm (socket, Media Converter Switch)
• 7 mm wrench (ground screw Media Converter Switch)
AXIS Q60 Series
9