Access The Product - Axis Q6042-C PTZ Installationshandbuch

Mounting example (wall bracket sold separately)
1 Multi-connector cable
2
Alignment indicator – multi-connector cable
3
Alignment indicator – camera
6. Slide the unit holders on the camera into the slots in the mounting bracket and rotate
the camera unit.
7. Secure the network camera to the mounting bracket by tightening the screws.

Access the Product

Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/
Clean the Outer Heat Sink
Dust and particle buildup could affect the performance of the cooling system. To maintain the
performance level, the outer heat sink in the camera's cooling system may need occasional or
regular cleaning.
AXIS Q60 Series
33
1
2
3