Herunterladen Inhalt Inhalt Diese Seite drucken

Axis Q6042-C PTZ Installationshandbuch Seite 17

Vorschau ausblenden Andere Handbücher für Q6042-C PTZ:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 71
Power connector (DC output) - Two 2-pin terminal block for power output (pin 4 is not used).
Network connector RJ45 (external) - Two RJ45 connectors (10/100Base-T) for network
connectivity.
Network slot SFP (external) - Two SFP slots (100Base-FX/1000Base-X) for network connectivity.
Each RJ45 and SFP port has its own dip switch. The dip switches control how the port forwards
data. For more information, see the User Manual.
Dip switch position
Default (middle)
Left
Right
Network connector (internal) - Two 2-pin Ethernet terminal blocks.
I/O connector (external) - 6-pin configurable I/O terminal block, which is connected to the
camera through the multi-connector cable. Use with external devices in combination with, for
example, tampering alarms, motion detection, event triggering, time lapse recording and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector
provides the interface to:
Digital output – For connecting external devices such as relays and LEDs.
Connected devices can be activated by the VAPIX® Application Programming
Interface, output buttons on the Live View page or by an Action Rule. The output
will show as active (shown under System Options > Port & Devices > Port
Status) if the alarm device is activated.
Digital input – An alarm input for connecting devices that can toggle between
an open and closed circuit, for example: PIRs, door/window contacts, glass
break detectors, etc. When a signal is received the state changes and the input
becomes active (shown under System Options > Port & Devices > Port Status).
I/O connector (internal) - 2–pin I/O terminal block.
Multi-Connector Cable
Note
The supplied multi-connector cable is required in order to maintain the camera's NEMA/IP
rating.
Description of use
B
When connecting to the network, directly or through a
router or network switch.
A
When connecting to a camera or a device that is not
intended for viewing data.
C
When connecting to another media converter switch.
17
AXIS Q60 Series

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Q6045-c mk ii ptzQ60 seriesQ6044-c ptz

Inhaltsverzeichnis