Cleaning And Care - Grundig MT 6340 Bedienungsanleitung

OPERATION
Useful tips
Use the appliance with a relaxed
7
and comfortable grip.
Always cut against the natural
7
direction of hair growth.
Pause cutting at short intervals.
7
You can always make corrections
later, but you can't replace cut
hair.
INFORMATION
Cleaning and care
1 Switch off the appliance and, if
using in mains mode, remove the
mains adapter plug from the sock-
et or disconnect from USB port.
2
If attached, remove comb attach-
B
ment and carefully clean the
blade using the brush supplied.
3
Clean the housing and comb
attachment with a soft cloth mois-
tened with water.
Important
Never hold the appliance, cable
7
or mains adapter in water or any
other liquid.
4
Before using again, ensure all
parts have been carefully dried
with a soft cloth.
5
Do not use cleaning agents.
_____________________________
__________________________
When using for the first time, cut
7
small amounts of hair only. This
enables you to get used to the
adjustable cutting lengths.
Comb the hair repeatedly. While
7
combing, look for hair that is too
long.
For a good beard cut, the beard
7
should be dry.
6
Re-attach the comb attachment.
Note
Remove hair remains after each
7
use.
If you want to retain the original
7
condition of the blade for a long
time, it is worthwhile adding 1-2
drops of oil every 2-3 months using
the oil supplied.
Storage
If you are not going to be using the
appliance for a lengthy time, please
store it carefully.
ENGLISH 19