Cleaning And Care - Grundig ProClub MC 8030 Benutzerhandbuch

6 Information
The appliance must be cleaned
regularly so that you can continue
to enjoy its top performance and
optimum results.

6.1 Cleaning and care

Before cleaning, remove the plug
of adapter from the mains power
socket and remove the connect
wire from body.
Never used liquids to
C
clean the appliance.
Use the cleaning
brush provided and
water only.
C
Remove any clip-
pings after each
use.
The cutting head of
your appliance does
not normally need to
be oiled. If you want
C
to maintain the origi-
nal condition of the
cutting head for as
long as possible, it is
worth oiling it at reg-
ular intervals (with
the oil provided).
Hair and Beard Clipper / User Manual
Using exclusively the cleaning
brush, remove the hairs from the
blade head. The blade head may
be cleaned with water or other liq-
uids.
If in regular use, the blade head
should be oiled . For this, use the
supplied blade oil.
6.2 Storage
• If you do not plan to use the ap-
pliance for a long period of time,
please store it carefully.
• Make sure that it is unplugged
and is completely dry.
• Store the appliance in a cool, dry
place.
• Make sure that the appliance is
kept out of the reach of children.
For commissioning, general use
and cleaning, please observe the
instructions on pages 4-5-6 of this
operating manual.
41 / EN