Maintenance - Makita BO6030 Bedienungsanleitung

1. Applying wax
Fig.15
Use an optional sponge pad. Apply wax to the
sponge pad or work surface. Run the tool at low
speed to smooth out wax.
NOTE:
First, wax a non critical portion of the work surface
•
to make sure that the tool will not scratch the
surface or result in uneven waxing.
2. Removing wax
Fig.16
Use an optional felt pad. Run the tool at low speed
to remove wax.
3. Polishing
Fig.17
Use an optional wool pad. Run the tool at low
speed and apply the wool pad gently to the work
surface.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Hook-and-loop
•
pre-punched holes)
Hook-and-loop type sponge pad
•
Hook-and-loop type felt pad
•
Hook-and-loop type wool pad
•
Sanding cloth
•
Paper dust bag
•
Paper dust bag holder
•
Pad 150
•
or attachments
Only use accessory or
type abrasive discs
are
(with
7