Technical Data - Hilti SD 6000 Bedienungsanleitung

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held mains-powered electric tool for use in drywall installation.
The power tool is designed for driving and removing screws in drywall installation work. Drywall screws with
a length of up to 55 mm and a diameter of up to 4.2 mm can be used.
Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.3 Items supplied
Drywall screwdriver, operating instructions
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.com.
4

Technical data

4.1 Technical data
Rated current input
Weight in accordance
with EPTA procedure
01/2003
Rated speed under no
load
14 English
Printed: 22.10.2018 | Doc-Nr: PUB / 5135866 / 000 / 03
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
SD 2500
3.3 A
1.5 kg
0 /min ... 2,500 /min
Bit holder
Chuck
Power tool / accessory interface (snap-on
connection)
Coupling system / gearing
Universal hook
Motor
Air intake
Forward / reverse switch
Lockbutton for continuous operation
On/off switch
Supply cord
Rating plate
Air exit
Depth gauge
SD 5000
3.3 A
1.4 kg
0 /min ... 5,000 /min
2021370
*2021370*
SD 6000
3.3 A
1.4 kg
0 /min ... 6,000 /min