Radio mode
The device receives the FM waveband.
Switch the device on and select the radio function with the
The radio display is shown:
Channel search and saving
Automatic saving
Switch the radio function on.
Press the
SCAN
An automatic channel search and save starts. The memory spaces with the
frequencies are shown briefly in succession.
The radio can store up to 20 FM stations.
Automatic search
You can automatically set individual stations by holding down the
or
buttons for a while. The search stops at the next station with
relatively strong reception.
Manual search
You can manually set individual stations by holding down the
buttons briefly. The frequency moves 0.05 MHz each time you press the
button.
Manually saving stations
Tune in a station that you would like to save.
MEMORY
Press the
CH+/–
Use
Press
MEMORY
Calling up the stored station
CH+/–
Use
is displayed briefly.
button on the remote control.
button. "MEM" flashes on the display.
/
to select the desired memory space.
again to save the station in this memory space.
/
to move from one memory space to another. The number
SOURCE
button.
SEARCH
SEARCH
or
17
ES
DE
EN
PT