Troubleshooting Guide; Specifications - Cocraft NLC07 Original Bedienungsanleitung

Troubleshooting guide

The laser level will not
switch on.
The laser line flashes during
self-levelling.
The laser level shuts down
after a few seconds use.
The laser line is not clear.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take it to
your local collection facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.

Specifications

Batteries
Battery life
Range
Laser type
Laser Class
Accuracy
Self-levelling
Normal levelling time
Operating temperature
Tripod thread
Size
Weight (incl. batteries)
Check the capacity of the batteries and make sure that they
are inserted correctly. Follow the markings on the bottom of
the battery compartment.
The incline angle has been exceeded (4°).
Right the laser level.
The batteries are flat. Change the batteries.
• Check the batteries and replace if necessary.
• Check the laser window; clean it with a soft cloth if necessary.
• Ambient light level too high.
2 × AA/LR6
> 3 hours
Up to 20 m
510 nm
Class 2, P < 1 mW
± 0.5 mm/m
Up to ± 4°
< 5 s
0–40 °C
1/4"
85 × 55 × 71 mm
290 g
6