Never expose to direct sunlight. Divers are already familiar with this
rule for their gear. UV light and heat will cause premature wear in
diving gear.
Caring for seals
Regularly grease seals with a thin layer of silicon grease. This will keep
the seal pliable and prevent cracks. Be sure to follow the manufacturer
instructions for compatible greases. Only use non-silicone grease on
silicone seals.
Checking the seal
Verify the seal is in good condition before every use. It must be free
from cracks.
Always immediately remove any dirt – including tiny grains of sand
and every single hair. Hair in particular can affect the seal, thus
damage the camera.
GB/IE
129