Waterproof Housing Cleaning And Care; Routine Cleaning - Silvercrest SAC 8.0 A1 Bedienungs- Und Sicherheitshinweise

Waterproof housing cleaning and care

To ensure your waterproof housing will last a long time, you should keep a
few things in mind when caring for the waterproof housing and take your
time. The materials are subject to special requirements under water. If the
housing leaks, salt water may enter and damage the camera beyond repair.

Routine cleaning

Routinely clean the housing and clean it thoroughly after every dive.
Thoroughly rinse the housing with clean fresh water. If necessary, add
a little washing-up liquid to remove grease or dirt from the parts.
Immersing it in warm, distilled water is also advisable.
Then always rinse again with clean water.
Ideally let the housing sit open for a while after cleaning to allow
moisture in crevices to dry.
Clean the lens with mild washing-up liquid.
Use a microfibre cloth to clean and dry.
128 GB/IE