Technical Data - Milwaukee DD3-152 Originalbetriebsanleitung

TECHNICAL DATA

Diamond Drill
Production code
Rated input
No-load speed 1st gear
No-load speed 2nd gear
No-load speed 3rd gear
Drilling using the drill stand:
Drilling capacity max. in concrete, 1st/2nd/3rd gear
Hand-held drilling:
Drilling capacity max.
in concrete, 2nd/3rd gear
in brick and tile, 1st/2nd/3rd gear
Tool reception
Weight according EPTA-Procedure 01/2003
Weight + DR 152 T
Safety class
Degree of protection
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Drilling into concrete, wet
Vibration emission value a
h,DD
Uncertainty K=
Drilling into brick and tile, dry
Vibration emission value a
h
Uncertainty K=
Drill Stand
Length of the column
Drilling capacity max.
Bevel
Weight
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
DD3-152 DD3-152
(110-120 V) (220-240 V)
4315 31 02... 4280 01 02...
... 000001-999999 ... 000001-999999
1700 W 1900 W
0 -1000 min 0 -1050 min
-1
0 -2100 min 0 -2400 min
-1
0 -3900 min 0 -4700 min
-1
152/62/32 mm 152/62/32 mm
62/32 mm 62/32 mm
200/112/62 mm 200/112/62 mm
/ " / 1 / " UNC / " / 1 / " UNC
1 1 1 1
2 4 2 4
6,5 kg 6,5 kg
16,5 kg 16,5 kg
II II
IP 20 IP 20
84,0 dB (A) 84,0 dB (A)
95,0 dB (A) 95,0 dB (A)
85,1 dB (A) 85,1 dB (A)
97,0 dB (A) 97,0 dB (A)
14,1 m/s 14,1 m/s
2 2
2,0 m/s 2,0 m/s
2 2
16,3 m/s 16,3 m/s
2 2
2,0 m/s 2,0 m/s
2 2
DR 152 T
1000 mm
152 mm
0 - 45 °
10 kg
English
-1
-1
-1
GB
29