Herunterladen Inhalt Inhalt Diese Seite drucken

General Information; Description - Hilti DC230-S Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DC 230-S diamond cutter
To ensure correct use, please read the com-
plete operating instructions carefully before
the tool is operated for the first time.
All instructions concerning the use of the
tool are given also for your own safety!
Always keep these operating instructions
together with the tool. Ensure that the oper-
ating instructions are with the tool when it
is given to other persons.
The tool must be held in both hands when
in use. Always ensure that you work from
a secure stance.
DC 230-S operating controls
³ Clamping nut
· Kwik-lock clamping nut
» Diamond cutting disc / grinding disc
¿ Clamping flange
´ Locating lug
² Disc guard
¶ Spindle
º Adjusting nut
¾ Clamping lever
Contents

General information

EC declaration of conformity
8
Printed: 07.07.2013 | Doc-Nr: PUB / 5069485 / 000 / 00
General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Danger: electricity
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the power tool to which
these operating instructions apply is referred to as "the
tool".
Parts of the machine
µ Supporting rib
¸ Threaded bushing for side handle
¹ Spindle lockbutton
Release lever (for pivoting grip)
Side handle
On / off switch (dead-man type)
Page
8
8
9
10
11
12

Description

12
The DC 230-S is an electrically powered diamond cut-
12
ter for professional use in construction.
12
12
The following conditions must be observed when
13
the machine is in use:
13
- The machine must be connected to an AC mains sup-
13
ply which complies with the information printed on
the rating plate.
14
- Use only insert tools which are intended for use with
14
this machine.
14
- The machine is double insulated and must not be
14
earthed/grounded.
14
- Observe the accident prevention regulations issued
See cover
by the applicable trade association.

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis