Control Options During Voice Calls - Behnke-Telecom 5 Anleitung

▸
Via configuration step codes 10 and 11, you
may choose the activation codes for the relay.
If the activation code in configuration step
code 10 is changed from default 0 to e.g. 55,
the relay will be activated to open the door
by entering 55 followed by the # key on your
telephone with DTMF dialling.

5.4. Control options during voice calls

During a voice call, Behnke Series 5 Intercom
stations offer several control options to be acti-
vated via a telephone with DTMF dialling:
Entry
Activation code #
## x
* #
* *
www.behnke-online.com
Function
Activate the relay
In order for the relay to be activated via an activation code, the
relay operations mode and the activation interval and, of course,
the activation code need to be set accordingly.
Set the volume to x (x = 0 to 9)
Volume settings only apply to the current connection. In case the
volume is to be changed permanently, please perform configura-
tion steps 06 and 07.
Hang-up
Enter the set-up mode (subsequently enter the security code)
Instructions series 5
Operation
GB
59