Pre-Set Configuration In Connection With An Ac14 Isdn Agfeo Telephone System - Behnke-Telecom 5 Anleitung

3.4. Pre-set configuration in connection
with an AC14 ISDN AGFEO telephone
system
In case the device will be used with an AC14
ISDN AGFEO telephone system the following
pre-set configurations apply:
▸
Series 5 device with a single direct call button
+ one remote station + one telephone system
▸
Series 5 device with two direct call buttons +
two remote stations + one telephone system
a/b
15 V=
(optional)
www.behnke-online.com
TLN 2
(telephone no. 12)
TLN 1
(telephone no. 11)
a/b
Telephone system TLN 1-4
15 V=
Button 2 = Configuration step
code 22 calls TLN 2 (telephone no. 12)
Button 1 = Configuration step
code 21 calls TLN 1 (telephone no. 11)
a/b
Instructions series 5
Commissioning
Button 2
Button 1
GB
47