Set-Up; To Make A Call To A Saved Telephone Number; Open The Front Door From The Inside - Behnke-Telecom 5 Anleitung

1.2. Set-up

Remotely set up your new device via any tele-
phone with DTMF dialling. Take the following
steps:
Remotely by using a telephone with DTMF
dialling.
▸ Call your Behnke Series 5 Intercom station
▸
The Behnke Series 5 Intercom station will pick
up the call and answer with a beep
▸
Push the * key within two seconds after the
beep (in case more than two seconds elapse
before the * key is pressed, set-up mode may
also be activated by pressing the * key twice)
[beep]
▸
Enter the security code
(Default: 0 0 0 0) [beep] [beep]
▸
To enter a number for direct call button 1:
21 [beep] [beep] telephone number # [beep]
[beep] [beep]
▸
To enter a number for direct call button 2:
22 [beep] [beep] telephone number # [beep]
[beep] [beep]
▸
Exit set-up mode:
Press the * key or after 30 seconds of inactiv-
ity [device will shut off]
www.behnke-online.com
Quick instruction guide
1.3. To make a call to a saved telephone
number
1 ▸ Push the direct call button
2 ▸ The device will call the saved
telephone number
3 ▸ Speak

1.4. Open the front door from the inside

During the conversation the person called may
open the door from the inside by entering 0# via
a telephone with DTMF dialling.
Instructions series 5
GB
39