Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance Instructions - Napoleon PTSS165 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 55
10

Maintenance Instructions

We recommend this gas grill be thoroughly inspected and serviced annually by a qualified service person.
EN
At all times keep the gas grill area free from combustible materials, gasoline and other flammable vapors
and liquids. Do not obstruct the flow of ventilation and combustion air.
WARNING!
WARNING!
possibility of burns, maintenance should be done only when the grill is cool. A leak test must be
performed annually and whenever any component of the gas train is replaced or gas smell is present.
Tube Burners: The burner is made from 304 stainless steel, but extreme heat and a corrosive environment
can cause surface corrosion to occur. This can be removed with a brass wire brush.
CAUTION!
Spiders and insects are attracted to the smell of propane and natural gas. The burner is equipped with an
insect screen on the air shutter, which reduces the likelihood of insects building nests inside the burner
but does not entirely eliminate the problem. A nest or web can cause the burner to burn with a soft yellow
or orange flame or cause a fire (flashback) at the air shutter beneath the control panel. To clean the inside
of the burner, it must be removed from the gas grill: Remove the cooking grid and sear plate. Remove
the screw that attaches the burner to the side wall. Slide the burner to the front and upwards to remove.
Cleaning: Use a flexible venturi tube brush to clean the inside of the burner. Shake any loose debris from
the burner through the gas inlet. Check the burner ports and valve orifice for blockages and use an
opened paperclip to clean them. Take care not to enlarge the holes. Ensure the insect screen is clean,
tight, and free of any lint or other debris.
Reinstallation: Reverse the procedure to reinstall the burner. Check that the burner orifice enters the
burner when installing. Tighten screw and replace sear plate and cooking grid to complete installation.
WARNING!
important that the valve/orifice enters the burner tube before lighting
your gas grill. If the valve is not inside the burner tube a fire or explosion
could occur.
WARNING!
conditions exist, do not use the gas grill. Have the part replaced by your Napoleon Gas Grill dealer or
qualified gas installer.
www.napoleongrills.com
Always wear protective gloves and safety glasses when cleaning your grill.
Turn off the gas at the source and disconnect the unit before servicing. To avoid the
Beware of Spiders.
When reinstalling the burner after cleaning it is very
Hose: Check for abrasions, melting, cuts, and cracks in the hose. If any of these

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis